Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UNIVIEW Uniarch IPC-B100 Series
Summary of Contents for UNIVIEW Uniarch IPC-B100 Series
- Page 1 Network Bullet Cameras Quick Guide V1.00 BOM:3101C0RF...
-
Page 2: Safety And Compliance Information
Safety and Compliance Information Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read all of the Safety Instructions supplied with your equipment before installation and operation. Installation This device is a class A product and may cause radio interference. ... -
Page 3: Maintenance
scratch and contamination, etc. In order to keep the cover clean, do not remove the protective film on the cover during mounting. After mounting is finished, remove the film before the device is powered Contact professionals for maintenance information. Do not attempt ... -
Page 4: Regulatory Compliance
Regulatory Compliance FCC statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. - Page 5 Battery Directive-2013/56/EC Battery in the product complies with the European Battery Directive 2013/56/EC. For proper recycling, return the battery to your supplier or to a designated collection point.
-
Page 6: Default Ip, Username And Password
Default IP, Username and Password Default IP address: 192.168.1.13 Default username: admin Default password: 123456 The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters). -
Page 7: Cable Connection
Appearance Dimensions The figures in the manual are for your reference only. The actual appearance may vary with the product model. 4.5mm 0.18" Cable Connection The appearance and tail cable may vary with device model. Power interface Network interface Network... -
Page 8: Mount Your Camera
specifications, latest product datasheets. Press and hold the RESET button for at least 15 seconds to restore factory default settings. Perform this operation within 10 minutes after the device is powered on or the reset will fail otherwise. Mount Your Camera Wall Mount You can adopt wall mount or ceiling mount and purchase... - Page 9 3. Mount the plastic rivets 4. Screw the locknut to of self-tapping screws. loosen the universal Knock the plastic rivets joint before attaching your camera to the wall. into the guide holes and ensure that they are tightened up. 5. Mount your camera onto 6.
-
Page 10: Waterproof Components For An Rj45 Plug
7. Power on your camera and adjust images. The preceding installation process is for concealed installation, during which holes are punched on the wall and cables are penetrated into the wall. If open installation is adopted, cables are not penetrated into the wall but threaded out from the outlet on one side of the base. - Page 11 The PC you are using is installed with Internet Explorer 7.0 or later. Follow these steps to access your camera through the Web: 1. Open your browser, input the IP address of your camera in the address bar and then press Enter to open the login page.
Need help?
Do you have a question about the Uniarch IPC-B100 Series and is the answer not in the manual?
Questions and answers