Preparations; Check Before Mount - UNIVIEW IPC640 Series Quick Manual

Preparations

Check Before Mount

Figure 2-1 Check camera components.
Tail cable
Compared with the standard PTZ dome, the all-weather, infrared, and
laser PTZ domes have different camera designs and no housing. However,
other components are the same.
Verify the bearing capacity of the mounted position.
Verify that the mounted position meets the bearing requirements.
Otherwise, it is recommended to reinforce the mounted position for the
camera weight. For more information, see the product datasheet.
Verify the lightning protection and grounding requirements.
Select proper lightning protection devices for the power supply,

audio and video interfaces, and RS485 interfaces.
Refer to

Table 2-2 to ground the terminal properly.
Top sun shield
Bracket adapter
Tail cable unit
Safety rope
Camera
Dome housing
5