Section 13 - Using The Optional Data Card; Installing Data Card - Miller Electric Welder Owner's Manual

SECTION 13 – USING THE OPTIONAL DATA CARD

13-1. Installing Data Card

Card Data 60-M
3
2
1
1 Label
Peel backing from label and apply
to data card with THIS SIDE UP by
metal pins.
Write the names of the programs
stored on the card on the label.
Write the name of the piece of
equipment the card is used with on
the label.
2 Data Card
3 Card Slot
Insert card into slot. To format card,
turn On power to the unit. Select
Card from menu. Data card formats
when unit enters Card mode. Exit
Card mode and turn Off power.
Ref. 802 816 / Ref. 155 823
OM-196 188 Page 101