Upper Front Panel Controls - Miller Electric Welder Owner's Manual

4-4. Upper Front Panel Controls

1
1 Setup Pendant Receptacle
Receptacle for connecting
interconnecting cord.
2 Jog Forward Push Button
Advances wire out of the gun.
3 Wirefeed Indicator LED
LED lights when wire feed motor is
energized.
OM-196 188 Page 22
2 3 4
4 Jog Reverse Push Button
pendant Retracts wire up into the gun.
5 Gas Indicator LED
LED lights when gas solenoid is energized.
6 Purge Push Button
Momentarily energizes gas solenoid to
purge air from gun shielding gas line, or to
adjust shielding gas regulator.
5 6 7
7 Contactor Indicator LED
LED lights when welding power source
contactor is energized.
8 Main Display
Shows system state, active program, error
messages, weld parameters at idle and
during welding.
8
184 197