Residual Images Appear On Non-Printed Areas - Canon LBP7018C E-Manual

Residual Images Appear on Non-printed Areas

Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 2> Depending on the paper type or the operating environment (especially in a high-
humidity environment), residual images may appear.
Perform the following procedure in the printer driver.
Solution 1
If you change the settings, the toner may not fix onto paper well, and the printing may come out
faint.
Perform the following procedure in the printer driver.
Solution 2
Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the
described problems occur.
If you specify [Special Settings D2], printing speed drops.
1. Display the [Paper Source] sheet.
2. Change the [Paper Type] setting as follows.
<Current Setting>
[Plain Paper]
[Plain Paper H]
[Heavy Paper 1]
[Heavy Paper 2]
[Envelope H]
[Coated Paper 2]
[Coated Paper 3]
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings C3].
If the problem is not improved, specify [Special Settings D2].
<Changed Setting>
[Plain Paper L]
[Plain Paper]
[Plain Paper H]
[Heavy Paper 1]
[Envelope]
[Coated Paper 1]
[Coated Paper 2]
019A-06C