Vlan Binding; Application Example For Acl - TP-Link T1700G-28TQ User Manual

12.5.3 VLAN Binding

On this page you can bind a policy to a VLAN.
Choose the menu ACL→Policy Binding→VLAN Binding to load the following page.
The following entries are displayed on this screen:
VLAN-Bind Config

Policy Name:
VLAN ID:
VLAN-Bind Table

Index:
Policy Name:
VLAN ID:
Direction:
Configuration Procedure:
Step Operation
1 Configure ACL rules
2 Configure Policy
3 Bind the policy
port/VLAN

12.6 Application Example for ACL

Network Requirements

1. The manager of the R&D department can access to the forum of the company and the Internet
without any forbiddance. The MAC address of the manager is 00-64-A5-5D-12-C3.
2. The staff of the R&D department cannot access to the Internet but can visit the forum.
Figure 12-17 Bind the policy to the VLAN
Select the name of the policy you want to bind.
Enter the ID of the VLAN you want to bind.
Displays the index of the binding policy.
Displays the name of the binding policy.
Displays the ID of the VLAN bound to the corresponding policy.
Displays the binding direction.
Description
Required. On ACL→ACL Config configuration pages,
configure ACL rules to match packets.
Required. On ACL→Policy Config configuration pages,
configure the policy to control the data packets those match
the corresponding ACL rules.
to the Required. On ACL→Policy Binding configuration pages,
bind the policy to the port/VLAN to make the policy effective
on the corresponding port/VLAN.
188