IP Protocol:
S-Port:
D-Port:
12.3 Policy Config
A Policy is used to control the data packets those match the corresponding ACL rules by
configuring ACLs and actions together for effect.
The Policy Config can be implemented on Policy Summary, Police Create and Action Create
pages.
12.3.1 Policy Summary
On this page, you can view the ACL and the corresponding operations in the policy.
Choose the menu ACL→Policy Config→Policy Summary to load the following page.
The following entries are displayed on this screen:
Search Option
Select Policy:
Action Table
Select:
Index:
ACL ID:
12.3.2 Policy Create
On this page you can create the policy.
Choose the menu ACL→Policy Config→Policy Create to load the following page.
Select IP protocol contained in the rule.
Configure TCP/IP source port contained in the rule when TCP/UDP is
selected from the pull-down list of IP Protocol.
Configure TCP/IP destination port contained in the rule when
TCP/UDP is selected from the pull-down list of IP Protocol.
Figure 12-9 Policy Summary
Select name of the desired policy for view. If you want to delete the
desired policy, please click the Delete button.
Select the desired entry to delete the corresponding policy.
Displays the index of the policy.
Displays the ID of the ACL contained in the policy.
181