TP-Link T1700G-28TQ User Manual page 136

Choose the menu Multicast→IGMP Snooping→Multicast VLAN to load the following page.
The following entries are displayed on this screen:
Multicast VLAN

Multicast VLAN:
VLAN ID:
Router Port Time:
Member Port Time:
Dynamic Router
Ports:
Static Router Ports:
Note:
1. The router port should be in the multicast VLAN, otherwise the member ports cannot receive
multicast streams.
2. The Multicast VLAN won't take effect unless you first complete the configuration for the
corresponding VLAN owning the port on the 802.1Q VLAN page.
Figure 9-8 Multicast VLAN
Select Enable/Disable Multicast VLAN feature.
Enter the VLAN ID of the multicast VLAN.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router port,
it will consider this port is not a router port any more.
Specify the aging time of the member port. Within this time, if the
switch doesn't receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Displays the dynamic router ports of the multicast VLAN.
Specify the static router port which is mainly used in the network
with stable topology.
126