TP-Link T1700G-28TQ User Manual page 176

Choose the menu QoS→DiffServ→DSCP Priority to load the following page.
The following entries are displayed on this screen
DSCP Priority Config

DSCP Priority:
Priority Level

Select:
DSCP:
Priority:
Configuration Procedure:
Step Operation
Configure the mapping relation
1 between the DSCP priority and
802.1P priority
Configure the mapping relation
2
between CoS and TC
3 Select a schedule mode
Figure 11-9 DSCP Priority
:
Select Enable or Disable DSCP Priority.
Select the desired DSCP value for DSCP priority configuration. It
is multi-optional.
Indicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.
Indicates the 802.1P priority the packets with tag are mapped to.
The priorities are labeled as CoS0 ~ CoS7.
Description
Required. On QoS→DiffServ→DSCP Priority page,
enable DSCP Priority and configure the mapping
relation between the DSCP priority and CoS.
Required. On QoS→DiffServ→802.1P Priority page,
configure the mapping relation between CoS and TC.
Required. On QoS→DiffServ→Schedule Mode page,
select a schedule mode.
166