TP-Link T1700G-28TQ User Manual page 164

Modify Interface

Interface ID:
IP Address Mode:
IP Address:
Subnet Mask:
Admin Status:
Interface Name:
Secondary IP Create

IP Address:
Subnet Mask:
Secondary IP List

Select:
IP Address:
Subnet Mask:
Click Detail to display the following figure:
Display the ID of the interface corresponding to the VLAN ID,
loopback interface, routed port or port-channel.
View and modify the IP address allocation mode.
None: without ip.

Static: setup manually.

DHCP: allocated through DHCP.

BOOTP: allocated through BOOTP.

View and modify the IP address of the interface.
View and modify the subnet mask of the interface.
View and modify the Admin status. Choose Disable to disable
the interface's Layer 3 capabilities.
View and modify the interface name.
Specify the secondary IP address of the interface.
Specify the subnet mask of the interface's secondary IP address.
Select the secondary IP.
Displays the secondary IP address of the current interface.
Displays the subnet mask of the secondary IP address.
154