History - TP-Link T1700G-28TQ User Manual

14.3.2 History

On this page, you can configure the History Group for RMON.
Choose the menu SNMP→RMON→History to load the following page.
The following entries are displayed on this screen:
History Control Table

Select:
Index:
Port:
Interval:
Max Buckets:
Owner:
Status:
Figure 14-10 History Control
Select the desired entry for configuration.
Displays the index number of the entry.
Specify the port from which the history samples were taken.
Specify the interval to take samplings from the port.
Displays the maximum number of buckets desired for the RMON
history group of statistics, ranging from 1 to 130. The default is 50
buckets. 130 buckets supported at most so far.
Enter the name of the device or user that defined the entry.
Select Enable/Disable the corresponding sampling entry.
232