Table Of Contents - fadini MEC 200 Installation Manual

Table of Contents

To Fit To A Sliding Gate2
Points To Check With The Gate2
Fitting The Unit To The Fixing Base Plate2
Rack Fitting Operations3
Limit Switch Fitting Instructions4
Electrical Connections To The Electronic Control Panel4
Single- And Three-Phase For Sliding Gates Fitted With Limit Switches5
Dip-Switch5
Led Status Indication5
In Case Of Failure Of The Panel5
Low Voltage Electrical Connections6
Photocells And Safety Edge6
Button Switch6
Radio Contact6
Electrical Power Connections7
Operating Modes7
Time Clock Installation7
Automatic / Semiautomatic7
Pedestrian Opening7
Single-/Three-Phase For Sliding Gate Operators8
Photocell9
Push Button Switch9
24V 3W Indication Light9
Electric Lock9
Single- (230V) And Three-Phase (400V) Motors10
Flashing Lamp10
Hold On Switched (Deadman) Control10
Torque Control And Adjustment12
Technical Specifications13
Section View With Brake And Release Key13
Electric Motor13
Overall Dimensions14
Fitting Accessories For Installation15
Checking And Maintenance16
Important Warning Notes16