Input Configuration Menu; Overview - Sony TRINITRON BVM-A20F1U Operation Manual

[C] Setting the Input
Configuration – INPUT
CONFIGURATION Menu

Overview

Data pertaining to the input signals are set with this menu.
Set the input data for each channel.
A channel number (1 to 30) is entered with the numeric
keypad.
The following data can be set with the INPUT
CONFIGURATION menu.
• Assigning the signal format (FORMAT...menu)
• Assigning the slot number (SLOT NO menu)
• Assigning the input connector number (INPUT NO
menu)
• Setting the aspect ratio (SCREEN ASPECT menu)
• Selecting the scan size (SCAN SIZE menu)
• Selecting the sync mode (SYNC MODE menu)
• Setting the color temperature (COLOR TEMP
menu)
• Selecting the picture preset (PICTURE PRESET
menu)
• Setting the matrix (MATRIX... menu)
• Activating/deactivating the aperture adjustment
(APERTURE menu)
• Assigning the aperture value (VALUE menu)
• Selecting the Y/C separation filter (YC SEP menu)
• Selecting the NTSC COMB filter (NTSC COMB
FILTER menu)
• Selecting the marker display (MARKER DISPLAY
menu)
• Selecting the marker mode (MODE... menu)
• Adjusting H phase (H PHASE menu)
• Assigning the channel name (CHANNEL NAME...
menu)
• Copying from other data (COPY FROM... menu)
Channels 80 to 89 assignment
The channel numbers from 80 to 89 are assigned to switch
the signal system of the internal signals.
The channels 80 to 89 can be selected after selecting
channels 91 to 97 and the internal signal of the selected
signal system is output.
080: 575/50I
081: 480/60I
082: 1080/48I
083: 1080/50I
084: 576/50P
085: 480/60P
086: 1080/60I
087: 1035/60I
088: 720/50P
089: 720/60P
Channels 91 to 97 assignment
The channel numbers from 91 to 97 are assigned to internal
signals. The internal signal of the last signal system is
displayed. When the power is ON and the picture is
displayed by the internal signal, the signal system is 480/
60I.
091: PLUGE signal (Picture Line Up Generating
Equipment)
092: 20% gray signal
093: 100% white signal
094: five-step gray scale signal
095: cross-hatch signal
096: dot signal
097: 0% black signal
Assigning slot and connector numbers
Set which input connector on which slot will be assigned to
the current channel.
The slot number is as follows.
OPTION1 (outside of the monitor)
OPTION2
OPTION3 (inside of the monitor)
The input number is as follows.
When BKM-61D is installed (signal SDI D1, SDI D1/D2
AUTO, SDI D2 NTSC or SDI D2 PAL): DIGITAL1 or 2
When BKM-61D is installed (analog composite signal
COMPOSITE AUTO, NTSC, PAL, PAL-M or
SECAM): COMPOSITE1, 2 or 3
When BKM-62HS is installed (signal SDI HD/D1
AUTO, HD-SDI or SDI D1): DIGITAL1 or 2
[C] Setting the Input Configuration – INPUT CONFIGURATION Menu
37