Sony TRINITRON BVM-A20F1U Operation Manual page 116

ALIGNMENT (2/3) menu
Adjust the geometry of the picture.
H PIN: Correct side pincushion distortion.
H PIN BAL: Correct the balance of side pincushion
distortion.
H CORNER PIN: Correct pincushion distortion at the
sides of the picture.
H CORNER S: Correct S pincushion distortion at the
sides of the picture.
H KEY: Correct trapezoid distortion.
H KEY BAL: Correct the balance of trapezoid
distortion.
ALIGNMENT (3/3) menu
Adjust the convergence.
V STATIC CONV: Adjust vertical static convergence
on the whole screen.
V CONV TOP: Adjust vertical convergence at the top
of the screen.
V CONV BOT: Adjust vertical convergence at the
bottom of the screen.
H STATIC CONV: Adjust horizontal static
convergence on the whole screen.
48
[E] Installation Settings – INSTALLATION SETTINGS Menu
RESTORE FACTORY DATA: Reset the
ALIGNMENT data of the monitored signal system,
aspect and scan size to the default setting. The
following message appears to confirm the data reset
operation.
RESTORE FACTORY DATA?
OK: Press the ENTER or Ent button to reset the
data.
CANCEL: Press the MENU button to cancel the
reset operation.
[E3] DIGITAL UNIFORMITY ADJ... menu
Adjust the color unevenness of the CRT.
The signal system, aspect and scan size for the adjustment
are displayed on the top of the screen.
MANUAL...: Adjust with the MANUAL knobs.
k[E31]
AUTO FULL POINTS ADJ: Automatically adjust
the whole area of the screen in sequence using the
Sony BKM-14L Auto Setup Probe. k[E32]
AUTO ONE POINT ADJ: Automatically adjust only
the selected adjustment point of the screen using the
Sony BKM-14L Auto Setup Probe. k[E33]
SIGNAL: Select the white signal to be used for
adjustment (default setting is EXT).
EXT: Use an external input signal. Input the
appropriate signal.
INT: Use an internal white signal.
RESTORE FACTORY DATA: Reset the DIGITAL
UNIFORMITY data of the monitored signal
system, aspect and scan size to the default setting.
The following message appears to confirm the data
reset operation.
RESTORE FACTORY DATA?
OK: Press the ENTER or Ent button to reset the
data.
CANCEL: Press the MENU button to cancel the
reset operation.
[E31] MANUAL... menu
Adjust the gain of R, G and B with the MANUAL knobs.
MANUAL ADJUST: Adjust the gain. k[E311] (It
may take some time to display the next menu.)
CURSOR H SIZE: Specify the horizontal size of the
cursor (1 to 5).
V SIZE: Specify the vertical size of the cursor (1 to 5).