Sony TRINITRON BVM-A20F1U Operation Manual page 85

Rear
a AC IN socket (3-pin)
Connects the monitor control unit to an AC power source,
via the supplied AC power cord.
The AC IN connector takes precedence over the DC 5V IN
connector. When the AC power is used, the connection to
the DC 5V IN connector is not necessary.
AC power cord (supplied)
Attach the AC Plug holder to the AC power cord, and connect
it to the AC IN socket so that the cord does not come loose.
b LAN (10/100) connector (10BASE-T/100BASE-TX)
Connect to the network by using a 10BASE-T/100BASE-
TX LAN cable (shield type, optional) or to the LAN (10/
100) connector of the monitor. Or connect to the LAN (10/
100) connector of the monitor by using the SMF-700 or the
cable supplied with the BKM-35H.
CAUTION
• When an optional LAN cable is connected, use a shield
type cable to prevent miss-operation due to noises. Also,
to directly connect the BKM-15R to the LAN (10/100)
connector of the monitor (NETWORK switch is set to
PEER TO PEER) (1 to 1 connection), use a straight
(shield type) cable.
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port.
Follow the instructions for this port.
1 AC IN socket
AC Plug holder (supplied)
• The connection speed may be affected by the network
system. This unit does not guarantee the communication
speed or quality of 10BASE-T/100BASE-TX.
c DC 5V IN connector (male)
Connect to the DC 5V OUT connector of the monitor by
using the SMF-700 or the cable supplied with the BKM-
35H.
The power is supplied from the monitor via this cable.
The connection to the AC IN socket is not necessary.
When the AC power cord is connected, this connector does
not function.
Plug the female
connector into
the BKM-15R.
Note
Be sure to plug the female connector of the cable into
the DC 5V IN connector on the BKM-15R.
d NETWORK switch
Set to LAN for the network connections. Set to PEER TO
PEER, when the BKM-15R is connected directly to the
LAN (10/100) connector of the monitor (1 to 1
connection).
2 LAN (10/100) connector
3 DC 5V IN connector
4 NETWORK switch
(female)
Location and Function of Parts
17