Sony TRINITRON BVM-A20F1U Operation Manual page 96

Entering a numerical value
1
Using the UP or DOWN button or PHASE knob, move
the cursor to the desired item and press the ENTER or
Ent button.
The selected item is displayed in yellow text and set to
setting mode.
M AR K E R M O D E( 1/3 )
CH0 1
AS P E C T M O DE
AS P E CT
H P O S IT I O N
MA R K E R B R IG H T
AS P E C T M A RK E R
L I N E
C O L O R
AS P E C T B L AN K I NG
M O D E
2
Set the value in one of the following three ways:
• Enter the value directly using the numeric keypad
and press the ENTER or Ent button.
• Select the value using the UP or DOWN button.
• Select the value using the PHASE knob.
3
Press the ENTER or Ent button.
The setting is confirmed (The item is displayed in
white text again).
Entering characters
1
Display the setting menu and set the cursor to NEW
NAME using the UP or DOWN button or PHASE
knob.
C H A N NE L NA ME
CH0 1
PR O G
ED I T
CA M
VT R
PR E V
NE W N AM E
28
Basic Menu Operations
1 6:9
---
0 00
90 IR E
OFF
-- -
- --
OF F
-- -
2
Press the ENTER or Ent button.
"?" is displayed in yellow. The "?" indicates the
position where character input is possible.
C H A N N E L N A M E
C H 0 1
P R O G
E D I T
C A M
V T R
P R E V
N E W N A M E
?
3
Select the character you wish to enter using the UP or
DOWN button or PHASE knob.
When you press the UP button, or turn the PHASE
knob clockwise, the characters and symbols appear in
the order shown below.
A B.......Y Z 0 1.......8 9 ( , ) : ; . – + / & (space) ?
If you press the DOWN button or turn the PHASE
knob counterclockwise, the characters and symbols
appear in the reverse order described above.
The usable symbols are limited depending on the
menu.
"(space)" is not used as a first character of a sentence.
4
Press the ENTER or Ent button.
The selected character is entered.
C H A N N E L N A M E
C H 0 1
P R O G
E D I T
C A M
V T R
P R E V
N E W N A M E
C ?
5
Repeat steps 3 and 4 until all the characters are entered,
then press the ENTER or Ent button.
The selected characters are confirmed, and the display
returns to the menu of the previous level.
To correct the entered character
Press the Del button on the numeric keypad. The character
on the left side of the "?" (in yellow) is deleted.