Sony TRINITRON BVM-A20F1U Operation Manual page 98

Main menu
SYSTEM CONFIGURATION [D]
INSTALLATION SETTINGS [E]
FILE MANAGEMENT [F]
STATUS [G]
CONTROLLER [H]
KEY PROTECT [I]
30
Menu Structure
Level 1
NETWORK [D1]
PARALLEL REMOTE [D2]
POWER [D3]
BLANKING SETTINGS [D4]
ON SCREEN SET [D5]
PASSWORD [D6]
MAINTENANCE [D7]
LANDING ADJUST [E1]
ALIGNMENT [E2]
DIGITAL UNIFORMITY ADJ [E3] Adjusts the color unevenness of the CRT. (page 48)
SAVE TO [F1]
COPY FROM [F2]
DELETE [F3]
DATA MAINTENANCE [F4]
CH STATUS [G1]
SLOT STATUS [G2]
MODEL NAME
SERIAL NO
SOFTWARE VERSION
OPERATION TIME
CRT TURN ON TIME
IP ADDR
CONTROLLER STATUS [G3]
MONITOR ID DISPLAY [H1]
NETWORK SETTING [H2]
NETWORK SW
SNMP SETTINGS [H3]
Functions
Sets the system of the remote control function, LAN, etc. (page
42)
Sets the IP address, subnet mask and default gateway. (page 43)
Sets the remote control function. (page 44)
Sets the condition of the monitor when the main power or
MONITOR I/1 switch is turned on. (page 44)
Adjusts the data for the picture. (page 45)
Sets the data for the screen display. (page 45)
Sets the passwords for the menu. (page 45)
Displays the menu for maintenance. (page 45)
Sets the initial value of landing, alignment, etc. (page 46)
Corrects the shift of beam landing caused by the earth's
magnetism. (page 47)
Adjusts the position and size of the picture. (page 47)
Saves, copies and deletes the system data. (page 50)
Writes the data. (page 51)
Reads or copies the data. (page 51)
Deletes the file. (page 51)
Services the system data. (page 51)
Displays the information about the monitor or options installed in
the monitor. (page 52)
Displays the information of the used channel. (page 53)
Displays the data about the optional board installed in the option
slot 1 to 3. (page 53)
Displays the model name. (page 53)
Displays the serial number. (page 53)
Displays the software version. (page 53)
Displays the operation time. (page 53)
Displays how long the CRT is used. (page 53)
Displays the IP address of the monitor. (page 53)
Displays the information on the controller. (page 53)
Sets the network of the controller. (page 54)
Sets the display method of the monitor select display window.
(page 54)
Displays the NETWORK SETTING menu. (page 54)
Sets the Ethernet connections. (page 54)
Sets CONTACT, NAME, LOCATION and TRAP. (page 54)
Sets whether or not to lock the buttons on the control unit. (page
55)