Overview; Features - Sony TRINITRON BVM-A20F1U Operation Manual

On the CRT
• Dust accumulates on the CRT easily. Clean the CRT
when necessary with a soft cloth.
The surface of the CRT is easily scratched; therefore, do
not rub or touch the surface of the CRT unnecessarily
since this may result in a scratched picture tube.
• If you touch the surface of the CRT, you may feel a weak
electrical shock. This is simply static electricity that is
generated on the surface of the CRT. It will not affect the
human body.
On displaying the 4:3 signal
The 16:9 mask has been attached to the monitor at the
factory. If the 16:9 button is pressed to change to the 4:3
aspect mode in this condition, the upper and lower portions
of the image is hidden by the mask. To display the 4:3
image, replace the 16:9 mask with the supplied 4:3 mask.
For details, see "Installation of the 4:3 Mask" on page 21.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1) 20-inch refers to the CRT size of the monitor. For effective picture size, see "Specifications" on page 59.
®
2) Trinitron is a registered trademark of Sony Corporation.
3) For details on the signal format, see "Available Signal Systems" on page 58 and "Available Signal Formats" on page 59.

Overview

The BVM-A20F1U/A20F1M/A20F1A is 20-inch
®
2)
Trinitron Color Video Monitor. They are suitable for
television stations or video production houses, where
precise image reproduction is required.

Features

Multiformat
The monitor supports the principal formats (480I/480P/
720P/1080I) for the digital broadcasts, NTSC and PAL
color systems whose horizontal frequency is between
3)
15.625 kHz and 45 kHz.
High resolution picture tube
The HR Trinitron picture tube produces a clear, high
resolution image.
Aperture Resolution at the center
of the picture
0.3 mm 900 TV lines (4:3)
700 TV lines (16:9)
Separate control unit
Using a separate control unit reduces the space needed for
the equipment.
The monitor is controlled by an optional BKM-15R
Monitor Control Unit. The BVM-A20F1U/A20F1M/
A20F1A can be connected to the BKM-15R via an optional
BKM-35H Monitor Control Unit Attachment Kit.
Remote control function in the network
connection (Ethernet control)
Up to 32 monitors and control units (max. 4) can be
connected by the Ethernet (10BASE-T/100BASE-TX)
connection. You can control individual monitors or
monitor groups simply by entering monitor ID or group ID
No.. You can also execute the same operation on all
connected monitors, or put all connected monitors into the
same setup and adjustment state.
1)
7
Overview