Maintenance; Warning; Battery Replacement; Cleaning - AEMC CM605 User Manual

5.1 Warning

• Remove the test leads from any input before opening the case. Do not operate
the instrument without a battery case cover.
• To avoid electrical shock, do not attempt to perform any servicing unless you are
qualified to do so.
• If the meter is not going to be used for a long period of time, take out the batter-
ies. Do not store the meter in high temperatures or high humidity.
• To avoid electrical shock and/or damage to the instrument, do not get water or
other foreign agents into the probe.

5.2 Battery Replacement

• The batteries will need to be replaced when the
display.
• The meter must be in the OFF position and disconnected from any circuit or
input.
• Remove the battery cover screws with a screwdriver.
• Replace the old batteries with two new 1.5V AAA (LR03) batteries.
• Replace the battery compartment cover and tighten the screws.

5.3 Cleaning

• To clean the instrument, wipe the case with a damp cloth and mild detergent. Do
not use abrasives or solvents.
• Do not get water inside the case. This may lead to electrical shock or damage to
the instrument.
AC Clamp-on Meter Model CM605
CHAPTER 5

MAINTENANCE

symbol appears on the
17