Maintenance; Cleaning; Battery Replacement - AEMC 6418 User Manual

Clamp-on ground tester

Hide thumbs Also See for 6418:

Table of Contents

Except for batteries, the instrument contains no parts

replaceable by personnel who are not specially trained and

accredited. Any unauthorized repair or replacement of a

part by an "equivalent" may gravely impair safety.

Disconnect everything connected to the instrument and set the switch to

OFF. Use a soft cloth, dampened with soapy water. Rinse with a damp

cloth and dry rapidly with a dry cloth or forced air. Do not use alcohol,

solvents, or hydrocarbons. Do not use the instrument again until it has

completely dried. Keep the air gap of the clamp perfectly clean.

The

symbol on the display screen blinks when batteries are low.

This

symbol is displayed steadily when the batteries require

replacement.

Disconnect everything connected to the instrument and set the

switch to OFF.

Turn the instrument over and unscrew the 2 captive screws securing

the battery compartment cover.

4. MAINTENANCE

Clamp-On Ground Tester Model 6418

Table of Contents