Swisscom Aton CL120-CLT120 Operating Instructions Manual page 44

Answering System
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone company
cannot do this:
– Set this unit's "Anzahl Ruftöne"
setting so that this unit's answering
system answers calls before the voice
mail service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller's recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is "3 Minuten".
1
M N (right soft key) #305
2
MbN: Select the desired setting. a MOKN
a M N
Selecting "Nur Begrüß."
You can select "Nur Begrüß." which sets
the unit to announce a greeting message to
callers but not record messages.
Select "Nur Begrüß." in step 2 on "Caller's
recording time", page 44.
Note:
R When you select "Nur Begrüß.":
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 38).
44
ATON_CL120_CLT120(en-de)_0722_ve44 44 2014/07/22 15:07:48