Note When Setting Up - Swisscom Aton CL120-CLT120 Operating Instructions Manual

Getting Started
R When the batteries are fully charged,
"Geladen" is displayed.

Note when setting up

Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack, if you have such a telephone jack in your
house.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
10
ATON_CL120_CLT120(en-de)_0722_ve10
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
1
Battery level
Icon
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
In continuous use
Not in use (standby)
Note:
R Actual battery performance depends on
usage and ambient environment.
R When eco mode is set to "ECO Plus", the
base unit stops communicating with the
handset while it is in standby mode. As a
result, the handset uses more power than
usual to search for the base unit and
therefore battery usage time is shortened
(page 15).
10
Battery level
High
Medium
Low
Needs charging.
Operating time
14 hours max.
250 hours max.
2014/07/22 15:07:45