Swisscom Aton CL120-CLT120 Operating Instructions Manual page 15

– "Entgangener Anruf" (Default: Off)
The settings can be set for each handset.
*1 Aton CLT120 series: page 3
1
M N (right soft key) #278
2
MbN: Select the desired setting and press
M N.
R " " is displayed next to the selected
features.
R To cancel a selected feature, press
M N again. " " disappears.
3
MOKN a M N
Note:
R If the indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
Screen saver mode
The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity if the handset is not on the base unit
or charger.
Activate the handset display again by:
– pressing M N when on a call.
– pressing M N at all other times.
Eco mode setting
If only one handset is registered, and that
handset is on the base unit, the base unit
automatically reduces the transmission power
by up to 99.9 %.
When the handset is not on the base unit, or if
multiple handsets are registered, you can
select the desired eco mode setting by
pressing MR/ECON.
The following settings are available for eco
mode.
– "ECO": Reduces the base unit transmission
power by up to 90 % in standby mode.
When this setting is selected,
displayed on the handset display instead of
.
– "ECO Plus": Reduces the base unit
transmission power completely in standby
mode.
ATON_CL120_CLT120(en-de)_0722_ve15
When this setting is selected,
displayed on the handset display instead of
.
– "ECO Aus" (default setting): Turns off eco
mode.
When this setting is selected,
are not displayed in the handset display.
Note:
R If there is a handset that is not compatible
with ECO Plus registered to the base unit,
"ECO Plus" is not available. If that
handset is registered while "ECO Plus"
was already selected, the setting changes
to "ECO Aus".
R When there is another cordless phone in
use nearby, the base unit transmission
power may not be reduced.
R When eco mode is set to "ECO Plus",
there is a delay between when calls are
received and when the handset starts
ringing.
R When eco mode is active, the range of the
base unit is reduced in standby mode.
R If you set repeater mode to "Ein"
(page 35):
– Eco mode is disabled.
– "ECO Modus" is not displayed in the
display menu (page 26).
R When eco mode is set to "ECO Plus",
battery usage time is shortened (page 10).
is
15
Getting Started
is
/
2014/07/22 15:07:46
15