Servicing Parts; Draining The Hot Water Tank - Cafection TOTAL LITE Service And Installation Manual

SERVICE MANUAL FOR INNOVATION
10

SERVICING PARTS

This section is intended to assist you in servicing various parts of the unit.
10.1

Draining the Hot Water Tank

We recommend allowing 3 hours for the hot water to cool prior to emptying the tank. Make sure you have
a 0.8 gallon container suitable for holding hot water.
1. Turn off and unplug the brewer;
2. Turn off the main water supply of the machine;
3. Remove the back panel;
4. Locate the drain tube with a red plug;
5. Direct the tube into the pail and remove the red plug. Warning, water may be hot!;
6. Drain the water from the water tank completely;
7. Reinstall by repeating these steps in the reverse order.
62
TOTAL LITE
Red plug
Drain tube
Single-Cup Brewer
TOTAL LITE Revision 1