Engine Mechanical System
Crankshaft Main Bearing Mark Location
Discrimination Of Crankshaft Main Bearing
12) Select the suitable bearing by using the selection
table below.
Crankshaft Main Bearing Selection Table
2. Check the crankshaft end play. Using a dial
indicator measure the clearance while prying the
crankshaft back and forth.
End play
Standard: 0.1 ~ 0.3mm (0.0039 ~ 0.118in)
44
3. Inspect the crankshaft main journals and pin
journals. Using a micrometer, measure the diameter
of each main journal and pin journal.
Main journal diameter:
75.982 ~ 76.000mm (2.9914 ~ 2.9921in)
Pin journal diameter:
63.482 ~ 63.500mm (2.4993 ~ 2.5000in)
Cylinder block