Oil Filter And Cooler Assembly - Hyundai Seasall S250S Workshop Manual

Engine Mechanical System
Liquid gasket: LOCTITE 5900 or equivalent
✍ NOTICE
• Apply sealant cautiously to prevent sealant from
coming in the oil pan during installation.
• After applying sealant, assemble the oil pan in
fifteen minutes.
7. Tighten the mounting bolts with the order and the
specified torque below.
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
59

Oil Filter And Cooler Assembly

1. Assemble the oil cooler (B) to the oil filter (A).
2. Install the oil filter and cooler assembly to the
cylinder block.
3. Check if there is rubber packing between the oil
filter and the block or the oil cooler. If so, apply
Engine oil.
Tightening Torque:
19.6 ~ 26.5Nm (2.0 ~ 2.7kgf.m, 14.5 ~19.5lb-ft)
4. Install the water outlet duct and then the intake and
exhaust system.
Lubrication System