Hyundai Seasall S250S Workshop Manual page 31

Engine Mechanical System
Removal
1. Remove the drive belt.
2. Remove the timing chain.
3. Remove the intake and exhaust manifold.
4. Remove the high pressure pipe, the injectors and the
delivery pipe.
5. Remove the glow plug wiring.
6. Remove the water outlet duct (A).
7. Remove the cylinder head cover(A).
8. Remove the camshaft bearing ladder (A).
30
9. Remove the sealing cap (A) from the cylinder head
assembly.
10.Remove the camshafts.
11. Remove the HLA (hydraulic lash adjuster) (A) and
the cam follower assembly (B).
1) After you removing it, HLA shall be held upright so
that oil in it should not spill and be assured that dust
does not adhere to it.
Cylinder Head assembly