Hyundai Seasall S250S Workshop Manual page 26

Engine Mechanical System
Tightening Torque:
7.8 ~ 11.8Nm (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft) - chain
guide
19.6 ~ 23.5Nm (2.0 ~ 2.4kgf.m, 14.5 ~ 17.4lb-ft) -
tensioner lever
✍ NOTICE
If you have difficulty in installing of the lower chain
guide, turn the drive plate or move the SST a little bit.
10.Install the hydraulic tensioner(A).
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
11. Confirm that the timing marks are on the right
position and remove the SST (00200-0T005).
12. Applying sealant on the front chain cover sealing
surface, install the front chain cover within fifteen
minutes.
25
Timing System
13. Tighten the front chain cover mounting bolts (A-
20EA, B-4EA)
Tightening Torque:
7.8 ~ 11.8Nm (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft) - 20EA
19.6 ~ 25.5Nm (2.0 ~ 2.6kgf.m, 14.5 ~ 18.8lb-ft) - 4EA
14. Applying sealant on the groove of the chain caps(C),
install the caps within fifteen minutes.
Tightening Torque:
7.8 ~ 11.8Nm (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Timing System