Configuring A Printer (Pc) - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260
NOTE:
Check your printer's specifications to ensure that it
supports IPP/1.1 as not all USB printers support
this protocol.
Ensure the printer driver supports your operating
system.
To ensure that your printer driver is working
properly on a PC, you can connect the printer to
the PC directly before attempting to install the
printer over the network.

Configuring a Printer (PC)

Windows XP
1. Start the Add Printer Wizard:

Click Start.

Select Settings  Printers and Faxes  Add
Printer. OR

Select Control Panel  Printers and Faxes 
Add Printer.
2. Choose "A network printer, or a printer attached to
another computer". Click Next.
3. Choose "Connect to a printer on the Internet or on a
home or office network".

Enter the URL: http://192.168.1.1:631/IPP

Click Next.
The specific URL may vary for different models of
printer. Please refer to printer manufacturer's
documentation. Some common printer URLs are:

http://192.168.1.1:631/

http://192.168.1.1:631/IPP/

http:// 192.168.1.1:631/IPP/port1
NOTE:
This step will fail if your printer is not connected or
does not support IPP.
You may also have to power-cycle your printer
when changing USB hosts.
Chapter 3: USB Sharing
23