SAGEMCOM F@st 5260 User Manual page 25

Sagemcom F@st 5260
4. Choose correct printer driver. Click Ok.
If the printer was previously installed on this PC, then
the driver should appear in the list under the proper
manufacturer and printer name.
NOTE:
Check the bottom of the list for your manufacturer.
Printers are not always listed alphabetically.
If your driver does not appear, you will need to locate
the correct driver and click Have Disk to install it.
5. (Optional). You can choose to set this printer as your
system Default Printer. Click Next.
6. If everything is configured correctly, the Wizard will
display the message, "You have successfully
completed the Add Printer Wizard." Click Finish to
complete.
Windows 7
1. Start the Add Printer Wizard:
 Click Start.
 Select Devices and Printer  Add Printer. OR
 Select Control Panel  Devices and Printer 
Add Printer.
2. Choose "Add a network, wireless or Bluetooth printer".
Click Next.
Chapter 3: USB Sharing
24