Change Your Wireless Network Name And Password; Configuring Your Wifi Network - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260

Change your Wireless Network Name and Password

Your wireless (WiFi) network name and password provides
Internet access to your network. Provide this information to
users whom you wish to access to your wireless Internet
connection.
1. Log in to the Web GUI.
2. Select the network to be configured by clicking on its
Gear icon.
3. Under the General tab, in the Access Point section,
enter the new network name in the "Name (SSID)"
field.
4. In the Security section, you can select the security
encryption mode. The default is WPA2-PSK / AES. It
is highly recommended that you retain the default
setting unless you have devices that do not support
WPA2.
5. Enter the new password in the "Passphrase" field.
6. Click Ok.

Configuring your WiFi Network

The following procedures will review how to:

turn your WiFi on and off;

broadcast your SSID

change your WiFi channel
Turn your WiFi on / off
1. Log in to the Web GUI
2. Select the network which you wish to turn on or off.
Note: By default, both the 2.4GHz and 5GHz WiFi
networks are enabled.
3. In the General Tab, under the Activation section:

slide the Enable switch to On to power the
network on; the Wireless indicator light should
turn a solid green.

slide the Enable switch to Off to power off the
network.
Chapter 2: Getting Started
13