SAGEMCOM F@st 5260 User Manual page 15

Sagemcom F@st 5260
4. Click Ok.
Broadcasting your network name (SSID)
Broadcasting your network name (SSID) allows you to more
easily detect and identify your WiFi network. By default, your
SSID Broadcast is enabled. Should you wish stop
broadcasting your SSID, follow the instructions below:
1. Log in to the Web GUI
2. Select the network you wish to stop broadcasting.
3. In the General Tab, under the Access Point section,
slide the Broadcast Name (SSID) switch to Off. Should
you wish to turn it on again, slide the switch to On.
4. Click Ok.
Change the WiFi Channel
You may wish to change your WiFi network channel to avoid
other WiFi networks or interfering devices such as
microwaves. If you select "Auto" the router will select the best
available channel for your wireless network.
1. Log in to the Web GUI
2. Select the network for which you wish to change the
WiFi channel.
3. In the General Tab, under the Access Point section,
click on Advanced.
4. Under Channel, open the pull-down menu and select a
channel you wish to switch to.
5. Click Ok.
Chapter 2: Getting Started
14