Upgrade Router's Firmware; Restore Factory Defaults - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260
Restore Router Configuration
1. Log in to the Web GUI.
2. Click on Router Settings.
3. Select Maintenance tab.
4. Under Configuration section, select file to restore under
"Restore File".
5. Click Restore button.
6. Click Ok.

Upgrade Router's Firmware

The F5260 automatically searches and installs upgrades
which may add features or fix issues in your router.
IMPORTANT:
While the firmware is upgrading, the Power indicator
light will turn a solid red. Do NOT interrupt the
upgrade process as it may permanently damage the
router.
Use the following instructions to manually upgrade the
firmware if required.
1. Log in to the Web GUI.
2. Click on Router Settings.
3. Select Maintenance tab.
4. Under the Upgrade section, select File Type from pull-
down menu.
5. Choose file under Image file.
6. Click Upgrade.
7. Click Ok.

Restore Factory Defaults

There are two ways to restore factory defaults:
Chapter 4: Administration
29