For Windows; For Mac; Printer Sharing; Connecting A Printer - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260

For Windows:

1. Connect a USB storage device to your Router's USB
port.
2. Open Windows Explorer.

Click on the Start menu.

Select All Programs and click Accessories.

Click on Windows Explorer.
3. Once open, enter \\192.168.1.1 in the address bar.
Your window will now show your connected USB
storage device.
WARNING:
To safely disconnect a USB storage device, please
ensure that you follow the directions outlined in this
manual (p. 17). It is your responsibility to create
data backups prior to using USB storage devices
with your Wireless Router.

For Mac:

1. Connect a USB drive to your router.
2. On your Mac, click on Go, then Connect to Server.
3. Type smb://192.168.1.1 under Server Address.
4. Click Connect.
5. You will be asked for your Mac password. Please enter
the password and click Connect.
6. A window will appear with the contents of your USB
drive.
7. You can locate the USB storage device under
Computer.
WARNING:
To safely disconnect a USB storage device, please
ensure that you follow the directions outlined in this
manual (p. 17). It is your responsibility to create
data backups prior to using USB storage devices
with your Wireless Router.

Printer Sharing

Printers may be shared within your network by connecting a
USB printer device to your router. All users connected to your
network will be able to use the device attached to your router.

Connecting a Printer

Printer sharing is enabled by default. To connect a printer,
attach it to the USB port located on the side panel of the router
(there is only one USB port). The USB indicator light will turn
on when the device is recognized.
Chapter 3: USB Sharing
22