Description Of The Vocal Synthesis (Audible Indications From The Door Panel); Adjusting The Door Panel Communication Volume; Adjusting The Vocal Synthesis Volume - golmar GB2 Nexa Modular User Manual

VIDEO DOOR ENTRY SYSTEM GB2 NEXA MODULAR - BUILDING
DOOR PANEL INSTALLATION

Description of the vocal synthesis (audible indications from the door panel):

Audible indications from the door panel for people with impaired vision.
If the vocal synthesis in the sound module is activated (see pages 14 and 16 to congure), a voice with the
following messages can be heard from the door panel:
- While calling: "Call is in progress".
- Start communication: "You can speak now".
- During door release: "Door is open".
- End of communication: "Communication is nished".
- Calling at one door panel while another door panel is communicating (with more than one door panel):
"System is busy, try later".
- While calling and the monitor is in "Do not disturb" mode: "Resident unavailable".
- While calling (apartment with no monitor or telephone): "Resident unavailable".

Adjusting the door panel communication volume:

If after starting the system the door panel audio volume seems inadequate, follow these steps:
- Call an apartment.
- The call is received in the apartment. Establish communication by pressing the
- Next, press the same push button used to call the apartment for 3 seconds until a series of conrmation tones
are heard and the door panel communication led's starts to blink.
- Each press on the same call push button will increase the door panel volume and the led's blink speed.
.
There are 5 volume settings and the led's
volume. After reaching "setting 5", that is maximum blink speed and volume, the next setting is "setting 1",
that is minimum blink speed and volume (carousel mode).
- To save the volume setting keep the same push button used to call the apartment pressed until a series of
conrmation tones are heard and the door panel communication LED turns off.

Adjusting the vocal synthesis volume:

If after starting the system the vocal synthesis volume of the door panel seems inadequate, follow these steps:
- Within 10 seconds of connecting power to the door panel press any call push button on the door panel.
- Keep the call push button pressed until the synthesis volume is heard and the door panel communication led
- Each press on the same call push button will increase the synthesis volume and the LED's blink speed.
There are 5 volume settings and the LED's
volume. After reaching "setting 5", that is maximum blink speed and volume, the next setting is "setting 1", that is
minimum blink speed and synthesis volume (carousel mode).
- To save the volume setting keep the same push button used to call the apartment pressed until a series of
conrmation tones are heard and the door panel communication LED turns off.
blink speed will vary for each. Slow to fast blink - low to high
blink speed will vary for each. Slow to fast blink - low to high
push button on the monitor.
15