VIDEO Setup Menu
Setting Item
LUT
LUT MODE
For details on LUT file
operation, see
"Monitor LUT
Function" (page 66).
LUT STATUS
LUT LOAD
LUT SAVE
LUT RESET
Settings
Selects whether or not to use LUT, and when LUT is used,
selects the bank in which the LUT file is stored.
OFF [Off]: Does not perform LUT conversion.
BANK0 [Bank 0]: Selects the LUT file in bank 0.
BANK1 to BANK3 [Bank 1`Bank 3]FSelects the LUT
file in any of bank 1, bank 2, and bank 3.
FtH [Full to Head]: Does not use a LUT file and instead
adjusts signals that exceed the HD video level range
(10-bit signal levels, 4 to 1,019 steps) to match the
standard video levels from 64 (0% black) to 940 (100%
white) steps and then displays them.
Note
Keep in mind that LUT conversion is performed in respect
to the main output.
Displays a list of the LUT files in the banks. The currently
selected file is displayed in yellow. You can select a file
and then display a simple I/O curve, and delete
unnecessary LUT files from banks.
Loads a LUT file from a "Memory Stick" to a bank.
Saves a LUT file from a bank to a "Memory Stick."
Deletes all of the LUT files in Bank0 to Bank3.
VIDEO Setup Menu
73