About "Memory Stick" Media - Sony SR-R1 Operation Manual

About "Memory Stick"
Media
The unit supports the storing and recalling of the
following data on a "Memory Stick."
• SETUP data (page 29)
• LUT function data (page 66)
Supported "Memory Stick" types
The SR-R1 supports "Memory Stick" media up to
128 MB capacity, and "Memory Stick PRO"
media up to 8 GB capacity.
Note on data read/write speed
Data read/write speed may vary depending on the
combination of the "Memory Stick" and
"Memory Stick"-compliant product you use.
Note
"Memory Stick Duo" media and "Memory Stick PRO
Duo" media cannot be used as is in the SR-R1. In order
to use these "Memory Stick" types, a separately
available "Memory Stick Duo" adapter is required. If a
"Memory Stick Duo" or "Memory Stick PRO Duo" is
forced into the unit without an adapter, it may not be
possible to retrieve the media.
Inserting a "Memory Stick"
Insert the "Memory Stick" into "Memory Stick"
slot on the control panel with the logo side facing
down and the terminal facing up. Push the
"Memory Stick" all the way in.
"Memory Stick"
Note
Double-check that the "Memory Stick" is
oriented correctly before pushing it in. If you feel
a resistance, the "Memory Stick" may be upside
down, or reversed. Do not force the "Memory
Stick" in.
Removing the "Memory Stick"
Verify that the eject button indicator is not lit or
flashing, and press the button.
About "Memory Stick"
Terminal
Write-
protect tab
• When you set the "Memory Stick" erasure
prevention switch to "LOCK," data cannot be
recorded, edited, or erased.
• Data may be damaged if:
- You remove the "Memory Stick" or turn off
the unit while it is reading or writing data.

About "Memory Stick" Media

Control
Panel
Terminal
Logo side
Labeling position
99