Date Settings - Sony SR-R1 Operation Manual

To restore the setup data to the factory
default state (RESET menu)
You can restore the setup data to the factory
default state.
1
In the Setup Save/Load window, select
and confirm "RESET."
The Factory Reset screen appears, and then a
message for confirming the reset appears.
2
Select [OK], and then press the
SELECT/ENTER dial while holding
down the FUNC button.
S Y S T E M S e t u p
FILE LIST
SIGNAL FORMAT
TEST SG
LCD
KEYMAP
KEYINHI MAP
REMOTE/LOCAL LCC
REC INHI ON
EDIT
POWER
BATTERY
SETUP
OTHERS
SR-R1 S T O P
The setup data is restored to the factory
default state.
Tip
If you want to cancel the operation, select and
confirm [CANCEL] to return to the Setup Save
screen.
The window of the format recorded in the
setup data appears, and then the SR-R1
restarts after several seconds.
SETUP Save/Lode
COMMENT
SAVE
LOAD
RESET
Factory Reset
Set Factory
Default Data ? Press
[FUNC]+[ENTER]
to Reset.
CANCEL OK
00 :0 0 :0 0: 00
T CR

Date Settings

Display the System menu and select OTHERS
>SET DATE menu to set the date and time of the
unit.
To set the date and time (OTHERS >SET
DATE menu)
1
Display the System menu, and then
select and confirm "OTHERS" t
select and confirm "SET DATE."
2
Set the year, month, day, local time, and
UTC (Coordinated Universal Time)
offset (e.g., +9:00 for Japan), and then
select and confirm [SET].
Note
Time information is recorded to SRMemory cards in
UTC format and is displayed using the offset value as its
base.
Date Settings 31