Display Settings; Using The Backlight; Using The Screen Saver; Power Save Settings - Sony SR-R1 Operation Manual

Display Settings

You can make settings for backlight use in dark
locations, screen saver, etc.

Using the Backlight

Setting the LIGHT switch to ON turns the
backlight on.
dB
SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI
0
-10
HOME
-20
-30
-60
TC EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP
EE
L R L R L R L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8 9 10 11
VIDEO
STOP
TCG
AUDIO 00 00 00
H M
SYSTEM
16.5V REMAIN ENCODE 1920x1080
SR-SQ M 59.94I
10min
12bit 4:2:2
Adjusting the backlight brightness
Access the SYSTEM Setup menu and select LCD
> BRIGHT (see page 80). The Backlight
Brightness window appears, letting you adjust the
setting.
Turning the backlight off after a period of
inactivity
Access the SYSTEM Setup and select LCD >
LIGHT OFF (see page 80). The Backlight Off
Timer window appears, letting you adjust the
backlight activation duration. The setting range is
5 seconds to 5 minutes. To disable automatic
backlight deactivation, select "Disable."
Default setting: Disable

Using the Screen Saver

Access the SYSTEM Setup menu and select LCD
>SAVER (see page 80). The Screen Saver
window appears, letting you adjust the wait
interval until the screen saver is activated. The
setting range is 1 minute to 1 hour. To disable the
screen saver, select "Disable."
Default setting: Disable
28 Display Settings / Power Save Settings
LIGHT switch
SDI SDI SDI SDI SDI
KEY INHI
OFF ON
SELECT/ENTER
EMP EMP EMP EMP EMP LIGHT
L R L R L R L R L R
BACK
12 13 14 15 16 OFF ON
SR-R1
ADJUST
KEYINHI
RECINHI
00
EJECT STOP PLAY REC
Z x B z
S F
REW F FWD PAUSE
LOCAL
FUNC
m M X
EE
21:46

Power Save Settings

The SR-R1 can be set to reduce power
consumption and thereby extend battery life.
Available settings are described below.
Access the SYSTEM Setup menu and select
POWER (see page 82) to make a setting.
Item Setting
MODE: Conserves power by limiting the
output signal.
SAVE Selects whether power save mode is
MODE used or not.
SDI OUT Conserves power by disabling
signal output from HD SDI OUT
connectors A/B.
LED Conserves power by reducing the
indicator brightness.
TALLY
Operation in power save mode
When SAVE MODE is set to SAVE, thereby
activating power save mode, the following popup
appears on the display.
Power Save Mode1: *SR-R1
Power Save Mode1: **SR-R1
dB
SDI SDI SDI SDI SDI SDI SDI SDI SDI
0
-10
-20 INFORMATION
-30
-60
EMP EMP EMP EMP EMP EMP EMP EMP EMP
EE
L R L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8 9
POWER SAVE
MODE1
PLAY LOCK
TCG LTC INTRP DF EXT-LK
Entering Power Save Mode1
00 00 00
H M
LTC VITC AU
16.5V REMAIN ENCODE
SR-R1
- - -
10bit
Setting options are Power Save Mode 1 and
Power Save Mode 2 which operate as follows.
Power Save Mode 1: Only E-E image of SDI IN
connector is output.
Power Save Mode 2: No output.
SDI SDI SDI SDI SDI SDI SDI
EMP EMP EMP EMP EMP EMP EMP
L R L R L R L R L R L R L R
10 11 12 13 14 15 16
SR-R1
KEYINHI
RECINHI
00
S F
LOCAL
1920x1080
59.94I PB SAVE
4:2:2
21:46
XX SAVE