Sony SR-R1 Operation Manual page 82

Setting Item
EDIT
POWER
Settings to reduce
power consumption
by limiting output
signals or restricting
use of output
connectors
82 SYSTEM Setup Menu
RAMP Auto Spd1
Auto Spd2
Duration
Load Curve
Manu Spd1
Manu Spd2
MODE
SAVE MODE
Settings
When "LINE," INV," or "EVEN" is selected for RAMP,
sets the number of frames to shoot or frame interval at the
ramp start point or the number of frames to shoot or frame
interval at the ramp end point (1FRM/FPS).
When "LINE," INV," or "EVEN" is selected for RAMP,
sets the number of frames to shoot or frame interval at the
ramp start point or the number of frames to shoot or frame
interval at the ramp end point (1FRM/FPS).
(This is the number of frames to shoot or frame interval at
the end point when the number of frames to shoot at the
start point was set with "Auto Spd1," and the frame
interval at the start point when the number of frames to
shoot at the end point was set with "Auto Spd1.")
When "LINE," "INV," "EVEN," or "USER" is selected
for RAMP, sets the time (seconds) from the start to end of
the ramp.
0 to 30s (0s)
When "USER" is selected for RAMP, displays a list of
files on the "Memory Stick" in which an arbitrary curve
has been input.
When "MANU" is selected for RAMP, sets the upper
limit or lower limit for the number of frames to shoot or
frame interval (1FRM/FPS).
When "MANU" is selected for RAMP, sets the upper
limit or lower limit for the number of frames to shoot or
frame interval (1FRM/FPS).
(This is the lower limit when the upper limit was set with
Manu Spd1, and the upper limit when the lower limit was
set with Manu Spd1.)
Selects the output signal mode when playback is stopped
or the unit is in standby mode.
EE [EE]: Mode for selecting the EE signals (input
signals) as the video, audio, and time code. Select this
when you want to record or reduce power consumption
(normally, select this).
PB [PB]: Mode for selecting the playback signals as the
video, audio, and time code. Select this only when
controlling the unit as a player (using it as a dedicated
player) from an external device via the REMOTE IN
connector.
NORM [Normal]: Disables power save mode.
SAVE [Save]: Enables power save mode. After 30
seconds elapse since standby off, the unit transitions to
the power save mode in which only the E-E images
input from the SDI IN inputs are output (Power Save
Mode 1), and after another 30 seconds elapse, the unit
transitions to the power save mode in which all output
is turned off (Power Save Mode 2). When one of the
recording or playback control buttons is pressed, the
power save mode is canceled.