Sony SR-R1 Operation Manual page 72

Setting Item
CHAR
Settings related to the
text information
superimposed on the
output from the HD
SD OUT (MON)
connector
72 TC Setup Menu
MODE
WARN
REMAIN
BATT
Settings
Sets the content of text information.
+STAT [Time + Status]: Time counter display
information and status (operation status) information
+UB [Time + User Bit]: Time counter display information
and user bit data
+VITC [Time + VITC]: Time counter display information
and VITC
TIME [Time Only]: Time counter display information
only
+TM1 [Time + TM1]: Time counter display information
and TM1 counter value
+TM2 [Time + TM2]: Time counter display information
and TM2 counter value
When MODE is set to other than "TIME," selects whether
or not warning/error messages flash on the second line.
OFF [Off]: Does not display flashing messages.
ERR [Error]: Displays only flashing error messages.
W+E [Warn + Error]: Displays both flashing warning
messages and error messages.
Sets whether or not to display the remaining amount of
possible recording time estimated from the current
recording settings of the SRMemory card.
OFF [Off]: Does not display.
ON [On]: Displays.
Sets whether or not to display the remaining amount of
battery power.
OFF [Off]: Does not display.
ON [On]: Displays.