Oil Life Reset - RAM 1500 Owner's Manual

Hide thumbs Also See for 1500:
Table of Contents

Advertisement

• Unstored Messages
This message type is displayed indefinitely or until the
condition that activated the message is cleared. Examples
of this message type are "Turn Signal On" (if a turn signal
is left on) and "Lights On" (if driver leaves the vehicle).
• Unstored Messages Until RUN
These messages deal primarily with the Remote Start
feature. This message type is displayed until the ignition
is in the RUN state. Examples of this message type are
"Remote Start Aborted - Door Ajar" and "Press Brake
Pedal and Push Button to Start."
• Five Second Unstored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for five
seconds and then returns to the previous screen. An
example of this message type is "Automatic High Beams
On."
UNDERSTANDING YOUR INSTRUMENT PANEL 301

Oil Life Reset

Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will display in the EVIC after a single chime has sounded,
to indicate the next scheduled oil change interval. The
engine oil change indicator system is duty cycle based,
which means the engine oil change interval may fluctu-
ate, dependent upon your personal driving style.
NOTE: Use the steering wheel EVIC controls for the
following procedure(s).
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Push and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info."
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ram 3500Ram 2500

Table of Contents