Protection Mode
In order to "protect" the air suspension system, the
vehicle will enter Protection Mode when load leveling
cannot be achieved. Some driving may be required to
clear the protection mode telltale in the EVIC/DID. Refer
to "Electronic Vehicle Information Center (EVIC) or
Driver Information Display (DID)" in "Understanding
Your Instrument Panel" or "Uconnect® Settings" in "Un-
derstanding Your Instrument Panel" if equipped with a
touch screen radio for further information.
NOTE: If equipped with a touch screen radio all
enabling/disabling of air suspension features must be
done through the radio. Refer to "Uconnect® Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
Electronic Vehicle Information Center
(EVIC)/Driver Information Display (DID) Display
Messages
When the appropriate conditions exist, a message will
appear in the EVIC/DID display. Refer to "Electronic
Vehicle Information Center (EVIC) or Driver Information
Display (DID)" in "Understanding Your Instrument
Panel" for further information.
An audible chime will be heard whenever a system error
has been detected.
Operation
Pushing the Trailer Mode button once, while at Normal
Ride Height (NRH) will lower the vehicle to trailer level.
NOTE: The LED will continuously blink until vehicle
trailer level that been achieved.
Pushing the Trailer Mode again will raise the vehicle to
Normal Ride Height (NRH).
STARTING AND OPERATING 521
5