Canon iPF700 Series Service Manual page 92

Chapter 4
e. Ink tank cover
To detach the ink tank cover[1], remove the right side cover, right upper cover and ink tank cover lid and unscrew the front-panel screws[2]. Next, detach the
right cover by lifting it up as a whole.
f. Front cover
To detach the front cover[1], the right cover needs to be removed and the maintenance cartridge cover opened beforehand so the front cover can be slid to right
to remove.
To do this, unscrew the four front-panel screws[2] and remove two bottom claws[3], and slide the front cover to right. Then, pull out the upper eight hooks to
front to detach the front cover.
g. Upper rear cover
To detach the upper rear cover, first remove the top cover, the right rear cover and left front cover, left rear cover and paper release lever. Upper rear cover [1]
has upper top claw [2] inserted into cover stay [3]. Rotate the upper edge of the upper rear cover about 90 degrees to detach it.
Attach the upper rear cover with claw [2] at its upper edge into cover stay [3] first.
4-6
1
F-4-10
[1]
[2]
F-4-11
2
[2]
[1]
1
[3]