Setting Module/S Voltage; Update Voltage/Frequency/Phase; Figure 144: Module Config. Setup Menu; Figure 145: Setting The Module/S Voltage - Gamatronic POWER+ User Manual

7.9.3

Setting Module/s Voltage

1. Select Module/s voltage:
[Main Menu > SETUP > (password) > Module conf.]
1. Num of phase
2. Module/s frequency 6.Frequency Limits
3. Module/s voltage
4. Update Vo/Fr/ph
Use the ▲▼arrow keys to set the module/s voltage, press Ent, and then Esc:
2.
[Main Menu > SETUP > (password) > Module conf. > Module/s voltage]
Module/s voltage
1: 220V
2: 225V
3: 230V
7.9.4

Update Voltage/Frequency/Phase

1. Select Update Vo/Fr/ph:
[Main Menu > SETUP > (password) > Module conf.]
1. Num of phase
2. Module/s frequency 6.Frequency Limits
3. Module/s voltage
4. Update Vo/Fr/ph
2. Press Ent to update, and then Esc:
[Main Menu > SETUP > (password) > Module conf. > Update Vo/Fr/ph]
Nominal Voltage & Frequency
have been sent to all modules.
Please verify all modules were updated!
Exit this mode by pressing Esc.
POWER +
UPS,
PARALLEL USER GUIDE
G
AMATRONIC

Figure 144: Module Config. setup menu

4: 235V
5: 240V
6: 250V
(selected) 5: 260V

Figure 145: Setting the Module/s voltage

Figure 146: Module Config. setup menu

Figure 147: Updating the Module/s voltage/frequency/phase

, . 2.0
REL
E I L
LECTRONIC NDUSTRIES TD
5.Output Adjust
7.DC Calibration
8.AC Calibration
5.Output Adjust
7.DC Calibration
8.AC Calibration
.
87