7.12.3.4
Setting up the Static Switch
1.
Select Static Switch Setup:
[Main Menu > SETUP > (password) > Ent > Service > Configure]
1> # OF UPSs (redundancy) 5> Dry, Alarms
2> # OF UPSs (total)
3> # OF BATT
4> Static Switch Setup
2.
Select Set mask:
[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup]
1. Set mask
2. Configure BYPASS
3.
Use arrow keys to set the mask, and then press Ent:
[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup > Set
mask]
4.
Select Configure BYPASS:
[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup]
1. Set mask
2. Configure BYPASS
POWER +
UPS,
PARALLEL
USER GUIDE
G
E
AMATRONIC
LECTRONIC
7> Parallel/StandAlone
Figure 226: Service > Configure menu
Figure 227: Static Switch setup menu
Set mask
01
Figure 228: Set the mask
Figure 229: Static Switch setup menu
,
. 2.0
REL
I
L
.
NDUSTRIES
TD
6> Calibration
8> REM COMMAND
113