8.3.7.4
SNMP security
The SNMP security screen is where you define the SNMP communities that will have access to the Power+,
and whether that access will be "read only" (requests for data – a "read-only") or "read-write" (includes the
ability to modify G4 settings).
You also have the capability of limiting the IP addresses from which the G4 will accept SNMP packets. If the
IP address has four segments of zero, this means that all users in the community will have the designated
access.
8.3.7.5
SNMP trap targets
An SNMP trap is a destination to which the G4 will send alarm notifications using the SNMP protocol. For
each destination, an IP address and a port must be specified.
144
G
E
AMATRONIC
LECTRONIC
Figure 300: Define SNMP permissions
Figure 301: Defining SNMP trap targets
I
L
.
NDUSTRIES
TD
POWER +
PARALLEL
UPS,
,
. 2.0
USER GUIDE
REL