Lights
(accessory)
Removing the rear lights
1. Switch off the main power switch on the control
panel.
2. Remove the rear chassis cover. See page 7.
3. Divide the light's cables at the contact on the
cables.
4. Remove the two screws that hold the light.
They are located inside the cover. See the
picture.
Installation
Install the lights in the reverse order.
Replacing a bulb
1. Switch off the main power switch on the control
panel.
2. Remove the rear chassis cover. See page 7.
3. From the inside of the cover, remove the bulb
holder by pulling it straight out. Replace the
bulb.
4. Reinstall in the reverse order.
Fig. 81. The light's insert is fitted with two screws.
Fig. 80. Rear lights.Fig. 80. Rear lights.
39
Lights