Permobil Street Service Manual page 9

Removal of front battery
1. Place the wheelchair on a level surface.
2. Put the circuit breaker in the "OFF" position. It is
accessed through a hole in the chassis cover;
see figure 6.
3. Remove the front chassis cover; see page 7.
4. Disconnect the battery connectors. See the
decal on the inside of the chassis cover.
5. Lift out the battery. With a screwdriver through
the hole in the front edge of the chassis to
facilitate removal, the battery can be lifted;
see figure 10.
Fitting
1. Lift the battery into place. Put the battery belt
on the battery to facilitate removal.
2. Connect the battery connectors. See the decal
on the inside of the chassis cover.
3. Fit the front chassis cover; see page 7.
4. Put the circuit breaker in the "ON" position. It is
accessed through a hole in the chassis cover;
see figure 6.
Fig. 9. Front battery connection.
Fig. 10. With a screwdriver through the hole in
the front edge of the chassis to facilitate
removal, the battery can be lifted.
Fig. 11. Front battery removed.
9
Batteries