Using The 4" X 5" Film Holder - Microtek Artix Scan1100 Hardware User's Manual

E. Using the 4" x 5" Film Holder
1. Insert the film to be scanned into the 4" x 5" Film
Holder.
a) Push on the side to open the holder
b) Place the film in the holder.
c) Pull down the side to close the holder.
24 ArtixScan 1100 Hardware User's Guide
2. Place the 4"x5" film holder in the Main Holder.
3. Insert the whole assembly into the transparency bay
(the drawer or lower compartment) of the scanner.
4" x 5"
Film
Holder
Main
Holder